Top scrub the floor using Recover and maroon pad or equivalent to remove the top soiled layers of finish. INTERIM MAINTENANCE: Sweep large debris and dust mop. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating. Buff or burnish the floor to enhance gloss as needed (Gloss only). Damp mop or automatic scrub using a Betco floor cleaner. ROUTINE MAINTENANCE:Sweep large debris and dust mop. It is recommended to perform a Top Scrub with Betco's Recover stripper and a maroon pad or equivalent before coating the floor. Note: Many alternate flooring types may contain a factory finish that can affect coating performance. Elevated temperatures, heavy coats and humidity may extend dry time.Ī minimum of 2 coats of finish is recommended. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system.
Floor surface must be clean, dry and free of residue before finish is applied. RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions onīetco's Recover stripper label. Recommended for use on all types of LVT, sheet vinyl, linoleum, rubber flooring and other properly prepared hard surfaces.
